PREORDER! PLEASE ALLOW 1-2 WEEKS TO SHIP.

PLEASE READ! Due to the heavy laser engraving, the balance might be slightly off but this version is pretty decent compared to the previous.

Each top is CNC machined and deep, deep, deep laser engraved.

1" diameter solid brass with a 5mm ceramic ball tip.

Limited Edition to 27

This one came out absolutely insane.

PLEASE READ! Due to the heavy laser engraving, the balance might be slightly off but this version is pretty decent compared to the previous.

Each top is CNC machined and deep, deep, deep laser engraved.

1" diameter solid brass with a 5mm ceramic ball tip.

Limited Edition to 27

Fidgety, clicky, magical stress relief. It's life changing. That's possibly overstated but, at the very least, it's difficult to put down.

A carry along reminder.

CNC machined from Grade 5 Titanium

Deep laser engraved

Limited edition

1.5" x 1" x .300" thick (both pieces combined size)

Finished and coated by hand. 

100% Made in California

WARNING: There are powerful magnets used with this piece. Keep away from anything that may be damaged by magnets like electronics or credit cards.

A demo of v1.0 (sold out)

Here you go Bigfoot lovers/believers/skeptics. This one shows the obvious evolution of the Sasquatch.

Precision CNC machined from solid Brass, deep laser engraved and finished by hand in California.

Limited to 50

1.5" x 1" x .25" - Feels absolutely perfect in the hand

45 grams

Saint Michael the Archangel, defend us in battle.

Specifications:

CNC machined, deep laser engraved and finished by hand.

Metal: Brass

Size: 1.25" diameter 
         .187" thick (3/16") nice and heavy

Manually machined and laser engraved in California.

1.25" diameter x around .350" thick solid Brass

Ancient Bronze Arrowhead set in resin.

Each version is a One of a kind

Fear makes monsters of what lies before us. Courage does not make them smaller—it simply asks us not to run.

A lone figure stands before an impossible force, while the reverse carries the Litany Against Fear: a reminder that fear may come, fear may pass, and when it is gone, we remain.

Limited to 27 (next batch of 9 available)

Laser cut, deep laser engraved and finished by hand in California from solid Brass.

1.25 x 1.25" diameter x .250" thick

 PREORDER! SHIPS IN A WEEK

The original fidget toy. If you've never click clacked a Zippo to the point of driving everyone around you absolutely bats@#t, you're missing out. Plus, what if you get lost in the forest and need to build a fire? What then? Got you covered.

Authentic Brass Zippo deep laser engraved by yours truly.

Original art with that aged finish we all know and love.

AGED FINISH WILL VARY

Limited to 100

2" x 1.5"

Hybrid Memento Mori and Amor Fati

Precision CNC machined and deep laser engraved in California from solid Brass

Intended as a worry coin

Limited Edition

1.5" diameter x .25" thick

Version 2.0 with a bat filled "worry" side.

Your new Halloween carry. An homage the the O.G. Dracula, in my book, Bela Lugosi. If you don't recognize the quote, it's time to pick up Stokers classic.

Intended as a worry coin and a reminder to carry a stake.

Limited to 45

Black Sleeve included

A section from Chapter 27 of the Tao Te Ching but here's the whole verse...

A good wanderer leaves no trace.
A good speaker does not stutter.
A good counter needs no calculator.
A good door needs no lock, still it can't be opened.
A good mooring needs no knot, still no one can untie it.

Therefore the sage takes care of all people,
Forsaking no one.
He takes care of all things,
Forsaking nothing.
This is called following the light.

So, a good person is the bad person's teacher.
A bad person is the good person's task.
The one who does not honor the teacher
And the one who does not honor the task,
Although ever so knowledgeable,
They are confused.
This is called the subtle essence.

Precision CNC machined and deep laser engraved in California from solid metals.

Comes with our custom leather Sleeve (color will vary)

Intended as a worry coin

Available in Brass or Copper

Limited Edition

1.5" diameter x .25" thick

Inspired by The Matrix and our White Rabbit coin.

If you’re looking for a thick, structured tee that’s also super soft and breathable—look no further! The unisex garment-dyed heavyweight t-shirt ticks all the boxes and is made of 100% ring-spun cotton. The regular t-shirt style will complement most looks and fit you to a tee.

• 100% ring-spun cotton
• Fabric weight: 6.1 oz/yd² (206.8 g/m²)
• Garment-dyed
• Relaxed fit
• 7/8″ double-needle topstitched collar
• Twill-taped neck and shoulders for extra durability
• Double-needle armhole, sleeve, and bottom hems

This product is made especially for you as soon as you place an order, which is why it takes us a bit longer to deliver it to you. Making products on demand instead of in bulk helps reduce overproduction, so thank you for making thoughtful purchasing decisions!

Age restrictions: For adults
EU Warranty: 2 years

In compliance with the General Product Safety Regulation (GPSR), J. L. Lawson & Co. LLC and SINDEN VENTURES LIMITED ensure that all consumer products offered are safe and meet EU standards. For any product safety related inquiries or concerns, please contact our EU representative at gpsr@sindenventures.com. You can also write to us at 3 Gopher Flat Rd, #188, Sutter Creek, Ca, USA or Markou Evgenikou 11, Mesa Geitonia, 4002, Limassol, Cyprus.

PREORDER! PLEASE ALLOW 3-5 DAYS TO SHIP.

This Teetotum is your lucky ticket to old-timey fun! Handmade from the highest quality materials, this Gambling Top is sure to bring out the high roller in you. Our edc design is perfect for on-the-go fun. Place your bet and spin to win!

Each of our gambling teetotums are hand turned from a solid brass hex bar making each one unique.  The top is stamped, oxidized and then polished but will patina nicely in time.

Manually machined from 3/4" solid brass hex.

1/8" Ceramic tip for extended spin times and long wear.

Click here to see the making of one of our tops

The game:  Put & Take is a game that’s been around for generations and is fairly simple to play.  Each top comes with a card explaining the rules.

The second re-release from my wife's brand, Gemma Raffo. 

In her words...

I believe for most of us, we have experienced time in our lives when we are faced with uncertainty. When I was going through a difficult time in my life, I felt incredibly lost and hopeless. It was a time full of sadness for my entire family. During that time, I searched for something my girls and I could hold on to. I wanted something that would remind us of our love, strength and courage, so that when we were apart, they would know that I am always with them. So many of us are going through our own personal struggles and life changing events, or supporting a loved one who is. I created The Always Coin to remind us that when we feel alone in this world, there is someone there who loves and cares about you. Wherever you are, I am always with you.

Specifications:

CNC machined and deep laser engraved

Metal: Brass

Size: 1.25" diameter 
         .125" thick (just under 1/8" thick)

PREORDER! PLEASE ALLOW 2-3 WEEKS TO SHIP.

There are pieces you carry.

And there are pieces that carry weight.

The Bastion is the latter.

Handcrafted from solid 260 Brass, this single-finger form is wrapped in a coiling Japanese dragon — a symbol of protection, strength, and quiet authority. Scales rise along the edge like armor. Clouds gather in deep relief. The dragon encircles the center as if guarding what lies within.

The Bastion is built with deliberate mass and balanced proportions, designed to feel substantial in the hand — grounded, steady, intentional. The patina settles into the recesses, highlighting every carved detail and giving the piece the character of something discovered rather than manufactured.

Each Bastion is individually marked and part of an evolving series.

This first edition, the Dragon, represents vigilance and resilience — an emblem of strength carried quietly.

Material: Solid Brass
Finish: Hand-finished, antiqued relief

One size fits most. 1" diameter finger hole
1/2" thick 260 Brass

Limited to 27

Carry it daily.
Let it age with you.
Let it become yours.

PREORDER! SHIPS IN 1 WEEK.

Enough said.

Material: 260 Brass or Blackened Steel
Finish: Hand-finished, antiqued relief
Series: No. 04
Design: FAFO

One size fits most. 1" diameter finger hole
.385" thick mild steel or 260 Brass

Limited to 27

PREORDER! PLEASE ALLOW 2-3 WEEKS TO SHIP.

Not all guardians are gentle.

The third edition of The Bastion draws from the image of the Oni — a figure of strength, chaos, and reckoning. Fierce expressions emerge through layered relief, surrounded by flowing patterns that blur the line between menace and myth.

Cut and deep laser engraved from A36 steel, this Bastion carries a colder weight — firm, unyielding, and deliberate in hand. The darker finish settles deep into the engraving, revealing contrast and texture that shift with light and use.

Where earlier editions speak of protection and resolve,
the Oni embodies something older — a force that does not yield.

Each piece is individually marked as part of the continuing Bastion series.

NOW AVAILABLE IN BRASS!

Material: Mild Steel or 260 Brass
Finish: Hand-finished, antiqued relief
Series: No. 03
Design: Oni

One size fits most. 1" diameter finger hole
.385" thick mild steel

Limited to 27

PREORDER! PLEASE ALLOW 2-3 WEEKS TO SHIP.

Some symbols endure.

The second edition of The Bastion bears the image of St. Michael — the archangel, the defender, the one who stands firm against darkness. Rendered in deep relief, the scene carries a quiet intensity, rich with movement and purpose.

Cut, layered and laser engraved 260 Brass and 110 Copper. Finished by hand, the piece holds the same deliberate weight and presence the Bastion is known for. Edges feel grounded. Surfaces carry depth. Every mark settles into a finish that will continue to evolve with time and use.

Where the Dragon speaks of ancient strength,
St. Michael stands for resolve — unwavering, deliberate, and just.

Each piece is individually marked as part of the continuing Bastion series.

Material: Solid Brass & Copper
Finish: Hand-finished, antiqued relief
Series: No. 02
Design: St. Michael

Carry it with purpose.

One size fits most. 1" diameter finger hole
.385" thick 260 Brass & Copper layered

Limited to 27

Tired of those tough decisions?  Why not leave some up to fate?!

Our Decision Maker coin is minted from solid metal in the U. S.

Approximately 1.25" diameter x .125" thick

Solid .999 Fine Silver option is 26 grams or app. .85 troy ounce.

PREORDER! PLEASE ALLOW 2-3 WEEKS TO SHIP.

Celebrating our 10th year since the launch of the original Decision Maker!

These are painstakingly cast by hand in either .925 Silver or Bronze and then ultra deep laser engraved. The art is the same...but different. Take a looksy.

Limited Edition | 27 Sterling Silver  \ 54 Bronze

Specifications:

Bronze .75 ounce

Silver .85 ounce (about .7 Troy ounce)

1.2" diameter

Sterling Silver or Bronze cast by hand

This is our first co-branded coin with Coincide by JBstudio.

The Fibonacci Coin blurs the line between the two sides of a coin, revealing a three dimensional artifact with the functionality of an observational tool. The spiral is perfectly aligned on both sides and can be felt as negative relief on one side and as positive extrusion on the other. Every line, plane-change and proportional relationship is meticulously designed and crafted to express the principles of Natural Balance. The conceptual content can be read graphically as well as felt with the fingers. From every angle, the coin has a sense of visual harmony twisting into infinity, it’s energy simultaneously expanding past the rim and contracting towards an elusive conceptual origin.

 1.3" Diameter x .125" thick

Available in Bronze, Copper or .999 Silver

Specifications:

Minted in Arkansas

Metal: Solid Bronze, Solid Copper or .999 Fine Silver

Size: app. 1" diameter
         app. 1/8" thick

In 2011, when we launched the brand, I asked my dad if he could machine a bottle opener. At the time, I couldn't find a machined bottle opener anywhere. Most were cast, some were forged, but never machined. This is generally because machining is an expensive, precision process and not necessary for something like a bottle opener. My dad laughed at the idea but was up for it. I removed them from the site after he passed but now bringing them back with a slight upgrade.

CNC machined in California

Available in solid Brass and Grade 5 Titanium

Bottle opener is 2.5″ long x .5″ wide. 

In 2011, when we launched the brand, I asked my dad if he could machine a bottle opener. At the time, I couldn't find a machined bottle opener anywhere. Most were cast, some were forged, but never machined. This is generally because machining is an expensive, precision process and not necessary for something like a bottle opener. My dad laughed at the idea but was up for it. I removed them from the site after he passed but now bringing them back with a slight upgrade.

Year of the Dragon edition

Limited to less than 50 for sure

CNC machined, laser engraved and finished by hand in California

Available in Brass or Grade 5 Titanium (Titanium coming soon)

Bottle opener is 2.5″ long x .5″ wide. 

In 2011, when we launched the brand, I asked my dad if he could machine a bottle opener. At the time, I couldn't find a machined bottle opener anywhere. Most were cast, some were forged, but never machined. This is generally because machining is an expensive, precision process and not necessary for something like a bottle opener. My dad laughed at the idea but was up for it. I removed them from the site after he passed but now bringing them back with a slight upgrade.

I'm not sure what the exact statistics are but this quote comes flying out of my mouth around 86% of the time I hear a can open.

"I'll bet you could use a cool one?"
-Cousin Eddie

CNC machined, laser engraved and finished by hand in California

Available in Brass or Grade 5 Titanium

Bottle opener is 2.5″ long x .5″ wide. 

In 2011, when we launched the brand, I asked my dad if he could machine a bottle opener. At the time, I couldn't find a machined bottle opener anywhere. Most were cast, some were forged, but never machined. This is generally because machining is an expensive, precision process and not necessary for something like a bottle opener. My dad laughed at the idea but was up for it. I removed them from the site after he passed but now bringing them back with a slight upgrade.

The truth is out there.

Limited to less than 50 for sure

CNC machined, laser engraved and finished by hand in California

Available in Brass or Grade 5 Titanium (Titanium coming soon)

Bottle opener is 2.5″ long x .5″ wide. 

The Passing Coin is just that, it is a coin created to keep for yourself and pass on to those you love. We created the Passing Coin as a symbol of love, strength and reassurance, and to solidify the everlasting bond with those you care about. I love having something tangible to hold closely, acting as a constant reminder that no matter what the current situation may be in our lives, our love is safe and can withstand anything life may throw our way. We can hold onto the coin during the darkest of hours, whether feeling alone and apart from those we love most, nervous about starting a new chapter in life, living thousands of miles away for an unknown amount of time, no matter the circumstance, the Passing Coin reminds you that someone loves you. I carry this coin with me wherever I go, whether in my pocket or in my wallet, I never leave without it.  My girls carry one as well, which in turn keeps the bond and connection between us, and is a constant reminder that our love will never go away.  I love this coin, it can be given for a thousand different reasons to a thousand different people, and whatever the circumstance, the Passing Coin’s purpose will always remain; No matter where you are, I am here with you, and this too shall pass.

Lisa Lawson

Specifications:

Minted in Arkansas

Metal: Solid Bronze or Copper

Size: .900" diameter (just under an inch),
         .100" thick (just under 1/8" thick)

Years ago, I helped my wife launch her brand, Gemma Raffo. A brand born out adversity and pain with the hope of helping others get through difficult times. Unfortunately, trying to run two websites became overwhelming so we temporarily shut it down with the intention of bringing it back "when time allowed". I've finally accepted that time will never allow so we are going to combine the brands and release products, new and old, here on the J. L. L. site. 

This is a reintroduction of her first coin, The Passing Coin, but with a twist. A special edition CNC machined and deep laser engraved version. We will be bringing back the original soon but I was too excited about this version not to launch it.

The Passing Coin is just that, it is a coin created to keep for yourself and pass on to those you love. We created the Passing Coin as a symbol of love, strength and reassurance, and to solidify the everlasting bond with those you care about. I love having something tangible to hold closely, acting as a constant reminder that no matter what the current situation may be in our lives, our love is safe and can withstand anything life may throw our way. We can hold onto the coin during the darkest of hours, whether feeling alone and apart from those we love most, nervous about starting a new chapter in life, living thousands of miles away for an unknown amount of time, no matter the circumstance, the Passing Coin reminds you that someone loves you. I carry this coin with me wherever I go, whether in my pocket or in my wallet, I never leave without it.  My girls carry one as well, which in turn keeps the bond and connection between us, and is a constant reminder that our love will never go away.  I love this coin, it can be given for a thousand different reasons to a thousand different people, and whatever the circumstance, the Passing Coin’s purpose will always remain; No matter where you are, I am here with you, and this too shall pass.

Specifications:

CNC machined and deep laser engraved and hand ground edges

Metal: Brass

Size: 1.25" diameter 
         .187" thick 

This is our second co-branded coin with Coincide by JBstudio.

The Platonic Coin is the second in a collection of coins inspired by important developments in Philosophy, Science and Math. Like its predecessor, The Fibonacci Coin, its purpose is to highlight the beauty of the natural world and help us participate in an ongoing conversation about how we interpret and define it. Plato represents countless inquiring minds who, through the course of human evolution, have attempted to make sense of the seemingly unknowable nature of the universe.

 1.3" Diameter x .125" thick

Available in Bronze, Copper or .999 Silver

PREORDER! WILL SHIP IN A WEEK.

Limited edition solid Brass spin tray.

CNC machined and deep laser engraved under the glass.

Acid aged to give it a Bronze cast vibe.

Each one is cut to fit the glass perfectly.

Limited to 10

2 pounds of stunning Brass.

Spin glass included.

4" diameter x 1" tall

Tops are not included.