PREORDER! Please allow 2-3 weeks to ship.

Laser engraved and then cut, hammered, tweaked, sanded and polished by hand.

These aren't cast like traditional pendants. Odin's ravens and the Viking protection Helm are both deep laser engraved. The rest is cut and finished by hand. The little brass pins/rivets are set by hand.

Limited to 27 pieces

Each will be numbered

Made from .925 Sterling Silver and 260 Brass

1.25" diameter and app. .185" thick.

Available with either a 24" Stainless Steel or .925 Sterling Silver rounded box chain.

Scorsese fans....here ya go.

Precision CNC machined and deep laser engraved in California from solid Brass.

Limited to 72

1.5" diameter x .25" thick

Just another bad ass Incense Holder.

Limited to 10

Manually machined and deep laser engraved in Sutter Creek, Ca.

Brass and Copper with a Walnut base.

Each burner comes with a box of incense.

Specifically made for 20 minute "low smoke" Shoyeido Incense.

1.75" diameter x .3" high

Purchase more incense here

Just a simple "worry coin", no frills, no spinning...just feels comforting in the hand.  These are manually machined in limited quantities.

One of a kind. You will receive the coin pictured.

Here's that favorite quote from Camus again.

1.25" diameter, .300" thick (app.)

Custom leather Sleeve included

Careful when battling monsters.

Manually machined and laser engraved in California.

1.25" diameter x around .350" thick solid Brass

You have the choice to react or respond to a situation. This little "stone" will keep you grounded in those situations.

The "React" side is rough, the "Respond" side smooth and concave like a worry coin.

Minted and then laser engraved from solid Iron. Blackened, tumbled and oiled for a vintage look.

Intended as a gratitude/worry coin

1.2" diameter x .25" thick

PREORDER! PLEASE ALLOW 1-2 WEEKS TO SHIP.

The Mystic Seer will guide the way!

3 Yes, 2 No and 1 Maybe

Manually machined from 5/8" solid brass hex and deep laser engraved.

.625" hex x 1.25" long and weighs 50 grams.

Precision CNC machined and deep laser engraved in California from solid Brass.

Comes with our custom leather Sleeve.

Intended as a worry coin

This will likely become a series of "stones".

1.5" diameter x .25" thick

Commit to the task at hand!

Manually machined and laser engraved in California.

1.25" diameter x around .350" thick solid Brass

What if Cthulhu was a Buddhist?

Precision CNC machined from solid Copper, deep laser engraved and finished by hand in California.

1.5" x 1" x .25" - Feels absolutely perfect in the hand

45 grams

See what I did there with the title of the coin?

It's to help you change your paradigm! I'm getting old.

I have limiting beliefs about money...this coin is a daily reminder to shift my paradigm about it.

I'm going to do different versions, fitness, mental health etc...let me know what you need.

Specifications:

Minted blank and deep laser engraved

Metal: Bronze

Size: 1" diameter and slightly concave on both sides
         .125" thick (just under 1/8" thick)

This is likely the luckiest coin in existence. The all seeing eye is keeping it's eye on 7 lucky symbols; the elephant (raised trunk), a scarab, four leafed clover, horseshoe, a lucky rabbits foot, a wishbone and an acorn (who knew?). For good measure, I threw good ole lucky number 7 on the flip side.

The design is based off an old timey lucky penny that was made in the 1930's. The original design had some swastika's on it so was clearly made before Hitler ruined that symbol forever. I decided to replace them...for obvious reasons.

Deep laser engraved.

1.25" diameter solid Copper

Just a simple "worry coin", no frills, no spinning...just feels comforting in the hand.  These are manually machined in limited quantities.

One of a kind. You will receive the coin pictured.

1.25" diameter, .350" thick (app.)

Custom leather Sleeve included

Toss this to someone that's f'n around. It will be worth the 30 bucks.

Deep laser engraved.

1.25" diameter solid Copper or Stainless Steel

Here you go Bigfoot lovers/believers/skeptics. This one shows the obvious evolution of the Sasquatch.

Precision CNC machined from solid Brass, deep laser engraved and finished by hand in California.

Limited to 50

1.5" x 1" x .25" - Feels absolutely perfect in the hand

45 grams

Inspired by the Golden Record NASA sent to the aliens. Pretty damn cool.

Precision CNC machined and deep laser engraved in California from solid Brass.

1.5" diameter x .25" thick

Limited to 100

Aegishjalmr: known as the Viking symbol of protection. Viking warriors used to draw Aegishjalmr on their foreheads to be protected from their enemies and to instill fear in them but you can just carry it in your pocket since you're likely not going into battle soon.

Manually machined and laser engraved in California.

1.25" diameter x around .350" thick solid Brass

Odins raven's and the Tree of Life art on one side; concave, Protection Helm on the other

There are two certainties..

I couldn't help but notice the pirate population exploding of late. Time to go hunting.

Use this as a standard flip (heads or tails) coin. Great ball marker too...obviously.

Specifications:

CNC machined and deep laser engraved

Metal: Brass

Size: 1.25" diameter 
         .125" thick (just under 1/8" thick)

Just a simple "worry coin", no frills, no spinning...just feels comforting in the hand.  These are manually machined in limited quantities.

One of a kind. You will receive the coin pictured.

1.25" diameter, .350" thick (app.)

Custom leather Sleeve included

PREORDER! PLEASE ALLOW 2-3 WEEKS TO SHIP.

Machined by hand, poured by hand, bead blasted and finished by hand. 

Skulls are 3d printed and painted by hand so each will vary.

1.25" diameter, .350" thick (app.)

Coin is machined from Solid Brass

My dad passed away from multiple cancers in 2018. In early 2018, I machined a "worry coin" for him and stamped Fuck cancer on it. He'd carry it with him during his chemo. You may or may not have seen the free version that we make available on occasion. I've never intended on making a paid version but, after many requests, I'm finally giving in. This will also allow us to bring in more of the free versions for folks that don't have the funds for this one. 

These are CNC machined and then laser engraved but I'm keeping them as affordable as possible.

1.25" diameter solid Brass

Memento Mori | Remember you must die.

more importantly...

Memento Vivere | Remember you must LIVE

Some of you may see this as morbid to have on the back of a Fuck cancer coin but, for me, it makes more sense than anything and I know my dad would have agreed. Or not...you never knew with that guy.

Just a simple "worry coin", no frills, no spinning...just feels comforting in the hand.  These are manually machined in limited quantities.

One of a kind. You will receive the coin pictured.

For the worriers that worry too much.

1.25" diameter, .300" thick (app.)

Custom leather Sleeve included

I believe in making my own luck...but doesn't hurt to have a little superstition in the pocket for back up. Makes a great ball marker as well.

Specifications:

CNC machined and deep laser engraved

Finished with my patented* "aging" process so coins will vary.

Metal: Brass

Size: 1.25" diameter 
         .125" thick (just under 1/8" thick)

*it's not patented

Just a simple "worry coin", no frills, no spinning...just feels comforting in the hand.  These are manually machined in limited quantities.

One of a kind. You will receive the coin pictured.

1.25" diameter, .350" thick (app.)

Custom leather Sleeve included

There are two certainties..

Use this as a standard flip (heads or tails) coin. Great ball marker too...obviously.

Specifications:

CNC machined and deep laser engraved

Metal: Brass

Size: 1.25" diameter 
         .125" thick (just under 1/8" thick)

PRE-ORDER! PLEASE ALLOW 1-2 WEEKS  TO SHIP 

I've had many requests for a sobriety coin I felt like there were many options out there and I don't like the idea of profiting from addiction. Recently I had a new friend share some personal challenges so I was inspired to design one for her son.

HOW THIS WORKS:
This coin is now holding you accountable. When you hit the next year milestone, contact us and we will replace it for free. My hope is that over the years we are losing money on these.

If you're beyond the three year mark, choose "more than 3" and write the year in notes at checkout.

STRUGGLING FINANCIALLY?
If you're struggling with finances and you think this coin will benefit you with your struggles with addiction, please contact us and we will work something out.

CLICK HERE TO CONTACT

THE DESIGN
The Phoenix - Rebirth and transformation; rise from the ashes
Flower of Life - creation and cycles of life, death, and rebirth
Inscribed Triangle - Triangle represents strength, willpower & hope; Circle represents community support.
The Lotus - Stay strong through periods of struggle
Yin/Yang - Restore balance and harmony within
Quote - Inspiration from Albert Camus

Precision CNC machined and deep laser engraved in California from solid Brass.

1.5" diameter x .25" thick

Lisa's story is longer and better so click here for the full read.

Anthony's story
I'm not a stranger to the addicting quality of drugs and alcohol. "Runs in the family" but I'd argue it runs in the species. Existing is a daily struggle and it's easy to look for a quick solution to numb that struggle. For most of us, it starts innocently enough with our peer group but evolves into a way to relax or a reward at the end of a hard day to a way to cope with daily struggles. The story may not be the same for everyone but it ends up being the same for everyone. To be clear, I'm not for banning anything but I do believe that drugs and alcohol are poison to the mind and body...but so is sugar and fast food. If you're the type that can have an occasional drink and have it not impact you or your loved ones negatively, go for it. I happen to be this type of person but it's a slippery slope. One drink a night for a few nights in a row and the struggle ensues so I cut myself off for weeks, if not months. I finished that sentence and walked away for a moment because I had to ask myself a question...if having a few drinks causes a problem of wanting it daily, what am I doing drinking at all? Some self reflection is in order.

Joshua Tree tales, part...whatever.

Memory is funny. I have fond memories of Joshua Tree from my childhood but if I were really forced to sit down and hash it out, my sister and I were bored pretty much the majority of the time. I had a daily checklist I'd go through...BB gun, hang out in the gully, Lincoln Logs/army men and sometimes Peanuts puzzle. Not actual peanuts but a Peanuts puzzle with a missing piece. No other puzzles...just that one. This little fidget is an homage to that box of Lincoln Logs.

I hadn't seen the box for decades but, after my Grams passed (and the tweaker/looters were done) we found this box. The photo is the same box from my childhood. It was under the bed in the guest bedroom for decades. I'm not sure whose they were but either my dads or one of my uncles when they were kids. I can't say that we were over the moon playing with them, just curing some boredom and getting out of the heat but the feeling of the memory gives me joy. I guess that's just how it works.

When I started going through the box, I was surprised out how fidgety the little connectors were. I then thought.."dang...what if I cut it in half and put some magnets in?". So I did and my suspicions were confirmed.

The pics of the original wood prototype are not included with your purchase.

CNC machined in California from solid Brass or Grade 5 Titanium and finished by hand.

Titanium version is (painstakingly) laser engraved on every surface.

WARNING: Uses four powerful Neodymium magnets. Keep away from things that don't like magnets.

Dimension of both pieces together: 1.5" x .75" x .75"

Comes with our custom leather bag for carrying.

Genuine leather

Available in four colors!

Will fit a variety of our coins and "stones".

Made in USA

This sleeve was made for any of our 1.5" diameter worry stones but will also fit with the O2 Worry Coin and most of the manually machined resin, wood, metal worry coins.

Looking for a challenge?

How's bout' the perfect gift?!

Look no further...

Precision CNC machined in California and finished by hand.

"imperfect" version is due to minor chips on the board. The thin walls make it fragile while machining and easy to break. The choice was throw out a bunch of Walnut with minor imperfections but totally usable or sell them at a discount.

Limited to 100

Walnut Base - 5.5" x 5.5" x .75"

32 solid Brass pegs

BIG BROTHER IS WATCHING

WAR IS PEACE

FREEDOM IS SLAVERY

IGNORANCE IS STRENGTH

The third and final homage to Orwell's 1984

Available in solid Brass, Copper or .999 Fine Silver (app. 1 Troy Ounce)

1.5" diameter x .125" thick

Larger diameter than most of my coins but feels good in the hand.