An homage to the Prince of Darkness. RIP

Manually machined and laser engraved in California.

1.25" diameter x around .350" thick solid Brass

Solid Brass or Black Onyx inlay

Cthulhu called again.

Precision CNC machined from solid Brass or Copper, deep laser engraved and finished by hand in California.

1.5" x 1" x .25" - Feels absolutely perfect in the hand

45 grams

What if Cthulhu was a Buddhist?

Precision CNC machined from solid Copper, deep laser engraved and finished by hand in California.

1.5" x 1" x .25" - Feels absolutely perfect in the hand

45 grams

There are two certainties..

Use this as a standard flip (heads or tails) coin. Great ball marker too...obviously.

Specifications:

CNC machined and deep laser engraved

Metal: Brass

Size: 1.25" diameter 
         .125" thick (just under 1/8" thick)

If you don't make a choice, life will do it for you.

Decision Makers are fun and I'll keep making them but the reality is you already know what choice you want to make but you're likely paralyzed by the fear of making the wrong decision. This little "worry" coin will remind you to go with your gut and move forward with confidence. Make the decision and do what needs to be done to make it the right one. If it turns out to be a "mistake", learn from it and shift gears.

Specifications:

Minted blank and deep laser engraved

Metal: Bronze

Size: 1" diameter and slightly concave on both sides
         .125" thick (just under 1/8" thick)

The first rule about Fight Club is...

Deep laser engraved.

1.25" diameter solid Bronze

You get to decide which side is the yes side and which side is the no side.

These things are major laser hogs so I'm doing them in very small batches. Sign up to be notified if it's sold out.

Deep laser engraved.

1.25" diameter solid Bronze

Your new seasonal Decision Maker. Take out your magnifying glass when you get it to find all of the "Easter eggs".

Specifications:

CNC machined and deep laser engraved

Metal: Brass

Size: 1.25" diameter 
         .125" thick (just under 1/8" thick)

Limited Edition 99.9% pure Niobium

Blurple...this color is difficult to capture in photos. Fades from bright blue to purple.

5 available

Tired of those tough decisions?  Why not leave some up to fate?!

Approximately 1.25" diameter

PREORDER FOR THE REMAINING COPPER NOW OPEN. PLEASE ALLOW 3-4 WEEKS TO SHIP.

Our first coin collaboration with our good friends over at Wounded Elk. Sean is an insanely talented graphic artist, font designer and long time friend.

Available in Bronze, Copper or .999 Silver

Limited Edition and individually stamped

Bronze edition - limited to 999 (sold out)
Copper edition - limited to 999 (400 left available for PREORDER)
.999 Silver - limited to 250 (about 5 left)
Mokume - limited to 50 - pattern will vary (25 left for PREORDER)

1.25" Diameter x .125" thick

(Silver is approximately 3/4 Troy ounce)

Roll them BONES! 

Cut from square Copper bar stock, manually machined flat and then tumbled for about 10,000 hours (ish) to give them a rounded edge and vintage feel. After tumbling each pair is deep laser engraved and tumbled again.

Price is for a PAIR of dice. That's two of them...like shown in the pic.

.625" square

Solid Copper

70 grams per set

These pocketable dice are the perfect EDC entertainment.

Marty's Escape

Inspiration: I have this tin cup next to my lathe with water in it for wet sanding. One morning I came in to find a drowned spider. I swore to him that his life would not have been lost in vain so I saved him and planned on machining a little brass cup and set him in resin. As the weeks went by, I kept developing the idea. Would be cool if the spider looked like he was coming out of a castle dungeon type place. Be even cooler if there were stairs leading down to an abyss of nothingness. OH! I should laser engrave the Memento Mori art on the top area but then make it look like the floor fell away to some stairs. And, of course, Marty Mcfly should be trying to escape the abyss and the giant spider that lives down there on his hover board. Well this took me so long to get to the resin stage that when I finally picked up the spider to place him, he just fell apart. Dang. Who knew? Which then led me on the hunt for a 3d printed spider that would look as cool but turned out to be cooler.

One of a kind Diorama.

Manually machined, carved, ground and beaten. Figures are painted by hand.

Solid Brass and resin

2.5" diameter x 1" tall

1 pound

TITANIUM PREORDER SHIPS EARLY MAY

Fidgety, clicky, magical stress relief. It's life changing. That's possibly overstated but, at the very least, it's difficult to put down.

Deep laser engraved for the Year of the Dragon.

CNC machined from Grade 5 Titanium

Limited

1.5" x 1" x .300" thick (both pieces combined size)

Finished and coated by hand. 

100% Made in California

WARNING: There are powerful magnets used with this piece. Keep away from anything that may be damaged by magnets like electronics or credit cards.

A demo of v1.0 (sold out)

 A tribute to Bruce. Be water, my friend.

Fits perfectly in our custom leather Sleeve (click here) not included

Precision CNC machined and deep laser engraved in California from solid Brass or Grade 5 Titanium.

Intended as a worry coin

Limited Edition

1.5" diameter x .25" thick

READY TO SHIP!

I made it out of....brass...again...and again...and again.

Manually turned, stamped and finished limited edition solid brass dreidel.  Turned from a solid bar of 5/8" square brass and engraved/finished by hand.*  5/8" x 1.5"

Four sides deep laser engraved

.125" Tungsten carbide ball tip

Every dreidel comes with our custom blue leather carrying pouch

Limited to 72 (only have the first 35 currently available)

*Please expect slight variations and imperfections due to the handcrafted process.

 Check out the video of our 1st Edition being made.

PREORDER! 1-2 WEEKS TO SHIP

I know it's late...sorry about that.

I made it out of....brass...again...and again...and again.

Manually turned, stamped and finished limited edition Brass and Stainless Steel dreidel.  Turned from a solid bar of 5/8" square brass and engraved/finished by hand.*  5/8" x 1.5"

Four sides deep laser engraved

.125" Tungsten carbide ball tip

Limited to 72

*Please expect slight variations and imperfections due to the handcrafted process.

 Check out the video of our 1st Edition being made.

Now, more than ever, we need to listen to the Dude.

Precision CNC machined from solid Brass, deep laser engraved and finished by hand in California.

Limited to 100

1.5" x 1" x .25" - Feels absolutely perfect in the hand

45 grams

PRE-ORDER! PLEASE ALLOW 1-2 DAYS  TO SHIP

Abide.

Am I Wrong?!

Second in the series, "Walter", available for preorder!

Fits perfectly in our custom leather Sleeve (click here) not included

Precision CNC machined and deep laser engraved in California from solid Brass.

Intended as a worry coin

Limited Edition

1.5" diameter x .25" thick

Part Two

The Dude returns...man.

Brass version is 1.5" diameter, CNC machined and deep laser engraved.

.999 Silver version is 1.25" diameter, minted and deep laser engraved

Fits perfectly in our custom leather Sleeve (click here) not included

Intended as a Worry Coin

Intended as a worry coin

Limited Edition

1.5" diameter x .25" thick

Our limited edition ten year anniversary t-shirt is screened in the U.S. on a 100% Cotton, soft touch blank.

Limited to 272 pieces total

Unisex

Read more about the "Be an Eagle" tagline here.

Sizing: The fit is pretty standard but T-shirt sizing is all over the place these days. For reference, I'm 6'0 175lb and wear a Large. 

Carry around to jot down thoughts, sketches and doodles.

Comes in a 3 or 6 pack

4" x 5.5"

36 blank pages

Need a pen to go with it? Check out our EDC | Mark

Our pen intended for everyday carry.

I've been carrying around a tiny EDC pen for years. I love the design and fact that I can't feel it in my pocket but the problem is, I never use it. It's too small for me to use on a daily basis so I decided to design my own.

Comes loaded with a Parker QUINKflow medium ball point in black. Can be replaced with Gel if that's your preference.

O-Rings on both ends create a water resistant seal.

4" long when closed, 5" long when open and cap screwed on back.

Weighs about 40 grams.

Precision CNC machined in California

Every order comes with one of our Notebooks

"Imperfect" Event Horizons didn't make the cut but still look good and spin fairly well. Didn't want them to go to waste.

A pocket sized black hole that can be carried with you. This is an actual black hole (it's not) that you can carry with you. If you're not aware, black holes are dangerous so please be careful near the event horizon because nothing can escape the gravitational pull of a black hole. The escape velocity of a black hole is faster than the speed of light which basically means that nothing can get away.

• 99.9% pure blackened Iron or Fine Silver (app .85 Troy Ounce)
• 1.25" diameter
• Approximate .25" height (varies)
• .125" ceramic ball contact point (singularity)
• Pocketable
• Tactile and soothing (sort of a worry coin in that sense)
• Minted in the U. S. of A.
• Spin times vary from 5-15 minutes (too many variables to be specific)

My dad passed away from multiple cancers in 2018. In early 2018, I machined a "worry coin" for him and stamped Fuck cancer on it. He'd carry it with him during his chemo. I shared it with folks who then expressed interest so I had this more affordable version minted by my friends at Shire Post Mint so I could give them away. In 2019 I gave away almost 1000 of these coins but it got to be too time consuming and costly to do so I shelved the project for the time being. I'm not sure why it took me so long to come up with this idea as it seems pretty obvious.

I'll cover the cost of the coin if you can cover the cost of shipping. I don't mind folks getting more than one if they have a good place for them but please just be respectful and not wasteful but don't be shy! I want you guys to have and share these so please don't feel guilty about taking them for free.

My dad passed away from multiple cancers in 2018. In early 2018, I machined a "worry coin" for him and stamped Fuck cancer on it. He'd carry it with him during his chemo. You may or may not have seen the free version that we make available on occasion. I've never intended on making a paid version but, after many requests, I'm finally giving in. This will also allow us to bring in more of the free versions for folks that don't have the funds for this one. 

These are CNC machined and then laser engraved but I'm keeping them as affordable as possible. You may notice that I reversed the text on the Camus side from the original. This cut the laser time way down which allowed me to lower the price quite a bit.

1.25" diameter solid Brass

I love this quote from Albert Camus. It truly speaks to the human condition...in my humble opinion.

My dad passed away from multiple cancers in 2018. In early 2018, I machined a "worry coin" for him and stamped Fuck cancer on it. He'd carry it with him during his chemo. You may or may not have seen the free version that we make available on occasion. I've never intended on making a paid version but, after many requests, I'm finally giving in. This will also allow us to bring in more of the free versions for folks that don't have the funds for this one. 

These are CNC machined and then laser engraved but I'm keeping them as affordable as possible.

1.25" diameter solid Brass

Memento Mori | Remember you must die.

more importantly...

Memento Vivere | Remember you must LIVE

Some of you may see this as morbid to have on the back of a Fuck cancer coin but, for me, it makes more sense than anything and I know my dad would have agreed. Or not...you never knew with that guy.

Manually machined and laser engraved in California.

1.25" diameter x around .350" thick solid Brass

5mm ceramic ball for extended spin times.

Toss this to someone that's f'n around.

Deep laser engraved and hammered by hand.

1.25" diameter x 3/16" (.185) thick solid Brass

0, 1, 1, 2, 3, 5, 8, 13, 21, 34, 55, 89, 144...

Manually machined and laser engraved in California.

1.25" diameter x around .350" thick solid Brass

The Fibonacci side is machined to a slight concave for that soothing, worry relief.

Joshua Tree tales, part...whatever.

Memory is funny. I have fond memories of Joshua Tree from my childhood but if I were really forced to sit down and hash it out, my sister and I were bored pretty much the majority of the time. I had a daily checklist I'd go through...BB gun, hang out in the gully, Lincoln Logs/army men and sometimes Peanuts puzzle. Not actual peanuts but a Peanuts puzzle with a missing piece. No other puzzles...just that one. This little fidget is an homage to that box of Lincoln Logs.

I hadn't seen the box for decades but, after my Grams passed (and the tweaker/looters were done) we found this box. The photo is the same box from my childhood. It was under the bed in the guest bedroom for decades. I'm not sure whose they were but either my dads or one of my uncles when they were kids. I can't say that we were over the moon playing with them, just curing some boredom and getting out of the heat but the feeling of the memory gives me joy. I guess that's just how it works.

When I started going through the box, I was surprised out how fidgety the little connectors were. I then thought.."dang...what if I cut it in half and put some magnets in?". So I did and my suspicions were confirmed.

The pics of the original wood prototype are not included with your purchase.

CNC machined in California from solid Brass or Grade 5 Titanium and finished by hand.

Titanium version is (painstakingly) laser engraved on every surface.

WARNING: Uses four powerful Neodymium magnets. Keep away from things that don't like magnets.

Dimension of both pieces together: 1.5" x .75" x .75"

Comes with our custom leather bag for carrying.